The 6000-watt (W) power supply for the Cisco^® Catalyst^® 6500 Series chassis (Figure 1) is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.) All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.

·         Input Voltage - AC 120/230 V

·         Input Voltage Range - AC 85 - 264

·         Frequency Required - 47 - 63 Hz

·         Input Connector(s) - 2 x power IEC 320 EN 60320 C19

·         Power Capacity - 6 kW

·         Compliant Standards - CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ICES-003 Class A, AS/NZS 3548, FCC Part 15 A

·         Min/Max Operating Temperature – 32° -104° F

·         Operating Humidity – 10% - 95%