The 16-port 10 Gigabit Ethernet module doubles the 10 Gigabit Ethernet density on the Cisco Catalyst 6500 Series, providing up to 130 ports of 10 Gigabit Ethernet in a single Cisco Catalyst 6500 chassis. It is ideal for deployment in the LAN campus aggregation or data center access, where fanout and port density are important. The new 16-port 10 Gigabit Ethernet module complements the existing integrated services on the Cisco Catalyst 6500 Series, enabling customers to build a scalable, resilient, and manageable data center to meet their growing business needs to consolidate and virtualize servers and storage to maximize resource utilization and reduce capital expenses.
• The base module supports up to 16 pluggable X2 optics and has a 40-Gbps connection to the fabric and is therefore 4:1 oversubscribed.
• The distributed forwarding card provides hardware-based multicast replication, NetFlow, and MAC learning and forwards traffic at 48 Mpps. Besides increased port density, the 16-port 10 Gigabit Ethernet module has reduced power consumption. It uses half the power consumption per port compared to the 8-port 10 Gigabit Ethernet module, providing substantial power savings to the customer.
• The 16-port 10 Gigabit Ethernet module can operate in a mix of oversubscription mode and performance mode, providing maximum flexibility for the customer to connect some ports to servers and some ports to wiring closet uplinks.
• The module is supported in the Cisco Catalyst 6500 Series chassis.
• Optics supported : X2-10GB-LRM, X2-10GB-SR, X2-10GB-LR, X2-10GB-ER, X2-10GB-LX4, and X2-10GB-CX4.
• Requires Cisco IOS Software Release 12.2(33) SXH2.
• 16” x 14” x 1.2”
• 13 lbs.
When operating in performance mode, the 10 Gigabit Ethernet ports can also be used to create a virtual switch link in a Cisco Catalyst 6500 virtual switching system (VSS). When operating in an E-Series chassis (6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E), the 6509-NEB-A chassis with dual fan tray, the configuration is NEBS 3 compliant (supports operating temperatures up to 55°C). When operating in a non-E-Series chassis (6506, 6509, 6513) or 6509-NEB-A with single fan tray, fan tray 2 and 2500W or higher power supplies are required, and the configuration is not NEBS 3 compliant (supports operating temperatures up to 40°C only). The module can be deployed in all slots of a 3/4/6/9-slot chassis. When operating in a 13-slot chassis, it must be deployed in slots 9-13. It is not supported in the 6503 non-E Series chassis or Cisco 7600 Series Routers. The module is interoperable with all models of the Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10 Gigabit Ethernet uplinks or Cisco Catalyst 6500 Series Supervisor Engine 720, including VS-S720-10G-3C, VS-S720-10G-3CXL, WS-Sup720, WS-Sup720-3B, and WS-Sup720-3BXL.
